Sound Pressure; Vibration - Toro 04052TE Operator's Manual

• Check the safety interlock switches daily for proper
operation. If a switch should fail, replace the switch
before operating the machine.
• Using the machine demands attention. To prevent
loss of control:
– Do not drive close to sand traps, ditches, creeks,
or other hazards.
– Reduce speed when making sharp turns. Avoid
sudden stops and starts.
– When near or crossing roads, always yield the
right-of-way.
– Apply the service brakes when going downhill to
keep forward speed slow and to maintain control
of the machine.
• The grass basket must be in place during the mowing
operation for maximum safety. Shut the engine off
before emptying the basket.
• Do not touch the engine, muffler, or exhaust pipe
while the engine is running or soon after it has
stopped because these areas could be hot enough
to cause burns.
• When a person or pet appears unexpectedly in or
near the mowing area, stop mowing. Careless
operation, combined with terrain angles, ricochets,
or improperly positioned guards can lead to thrown
object injuries. Do not resume mowing until the
area is cleared.
Maintenance and Storage
• Check all fuel lines for tightness and wear on a
regular basis. Tighten or repair them as needed.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the cutting unit,
attachments, and any moving parts. Keep everyone
away.
• To ensure safety and accuracy, have an Authorized
Toro Distributor check the maximum engine speed
with a tachometer. Maximum governed engine speed
should be 3600 RPM.
• If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
• Use only Toro-approved attachments and
replacement parts. The warranty may be voided if
used with unapproved attachments.

Sound Pressure

This unit has a maximum sound pressure level at the
operator's ear of 83 dBA, based on measurements of
identical machines per EN 836 and ISO 11201.

Vibration

This unit does not exceed a hand/arm vibration level
of 10.05 m/s 2 , based on measurements of identical
machines per EN 1033 and EN 836.
6