Table of Contents
Advertisement
•
The direction on the machine (right or left) is determined
from the seated operator's position.
•
Know how to stop the engine quickly.
•
Do not operate the machine while wearing tennis shoes
or sneakers.
•
Wearing safety shoes and long pants is advisable and
required by some local ordinances and insurance
regulations.
•
Handle gasoline carefully. Wipe up any spills.
•
Using the machine demands attention. To prevent loss
of control:
– Do not drive close to sand traps, ditches, creeks, or
other hazards.
– When near or crossing roads, always yield the
right-of-way.
•
Do not touch the engine, muffler, or exhaust pipe while
the engine is running or soon after it has stopped because
these areas could be hot enough to cause burns.
•
When a person or pet appears unexpectedly in or near the
work area, stop operation.
Maintenance and Storage
•
Check all fuel lines for tightness and wear on a regular
basis. Tighten or repair them as needed.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the rollers, attachments and any
moving parts. Keep everyone away.
•
To ensure safety and accuracy, have an Authorized Toro
Distributor check the maximum engine speed with a
tachometer. Maximum governed engine speed should
be 3200 rpm.
•
If major repairs are ever needed or if assistance is desired,
contact an Authorized Toro Distributor.
•
Use only Toro-approved attachments and replacement
parts. The warranty may be voided if used with
unapproved attachments.
Sound Power Level
This unit has a guaranteed sound power level of 96 dBA,
which includes an Uncertainty Value (K) of 2 dBA.
Sound power level was determined according to the
procedures outlined in EN 11094.
Sound Pressure Level
This unit has a sound pressure level at the operator's ear of 80
dBA, which includes an Uncertainty Value (K) of 3 dBA.
Sound pressure level was determined according to the
procedures outlined in EN 836.
Vibration Level
Hand-Arm
Measured vibration level for right hand = 3 m/s
Measured vibration level for left hand = 3 m/s
Uncertainty Value (K) = 1.5 m/s
Measured values were determined according to the procedures
outlined in EN 836.
6
2
2
2
Advertisement
Table of Contents
