Checking Fluid Levels; Product Overview; Controls - Toro 30695 Operator's Manual

3

Checking Fluid Levels

No Parts Required
Procedure
1. Check the hydraulic fluid level before starting the
engine, refer to Checking the Hydraulic System.
2. Check the engine oil level before and after starting the
engine, refer to Checking the Engine Oil Level.
3. Check the cooling system before starting the engine;
refer to Checking the Cooling System.

Product Overview

3
2
1
1. Parking brake lever
2. Fuel cap (both sides)
3. Roll bar
3
1. Ignition switch
2. Throttle lever

Controls

Become familiar with all the controls before you start the
engine and operate the machine
12
4
5
6
4
G020877
Figure 4
4. Motion control lever
5. Seat
6. Seat belt
1
2
4
Figure 5
3. Power take off (PTO)
Switch
4. InfoCenter
(Figure 4 and Figure
g022099
5).