Motion Control Levers; Ignition Switch; Throttle Lever - Toro 30695 Operator's Manual

Motion Control Levers

The motion control levers control the forward and rearward
motions as well as the turning of the machine. Refer to
Driving the Machine (page
Parking Brake Lever
Whenever the engine is shut off, engage the parking brake to
prevent accidental movement of the machine. To engage the
parking brake, pull the parking brake lever rearward and up
(Figure 6). To release the parking brake, push the parking
brake lever forward and down.
1. Parking brake lever
CAUTION
Do not park the traction unit on a slope.

Ignition Switch

The ignition switch has 3 positions: Off, On/Preheat, and
Start.

Throttle Lever

The throttle lever controls the speed of the engine. Moving
the throttle lever forward toward the Fast position increases
the engine speed. Moving it rearward toward the Slow
position decreases the engine speed. The throttle controls the
speed of the blades and, in conjunction with motion control
levers, controls ground speed of the machine. Always run the
machine with the throttle in the Fast position when cutting
grass.
Power Take Off (PTO) Switch
The power take-off (PTO) switch starts and stops the mower
blades.
21).
G020866
Figure 6
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics
and other information about the machine
is a splash screen and main information screen of the
InfoCenter. You can switch between the splash screen and
main information screen, at any time, by pressing any of
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1
4
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
Middle Button—use this button to scroll down menus.
•
Right Button—use this button to open a menu where a
right arrow indicates additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be labeled
with an icon displaying its current function.
13
(Figure 7) There
g020650
2
3
Figure 7
3. Middle button
4. Left button