Inspection And Cleanup After Mowing; Maintenance; Recommended Maintenance Schedule - Toro 04356 Operator's Manual

(shift selector in No. 1), and cross severe undulations
carefully. Familiarize yourself with the width of the
machine. Do not attempt to pass between objects that are
close together so that costly damage and down time can be
prevented.
Inspection and Cleanup After
Mowing
At the completion of the mowing operation, thoroughly
wash the machine with a garden hose without a nozzle so
excessive water pressure will not cause contamination and

Maintenance

Note: Determine the left and right side of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After First 8 Hours
Every 50 Hours
Every 100 Hours
Every 200 Hours
Every 800 Hours
Every 2000 Hours or 2
Years (whichever
occurs first)
1
immediately after every washing, regardless of the interval listed
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
Change the engine oil.
Replace the engine oil filter.
Check the battery fluid level.
Check the battery cable connections.
Service the air filter pre-cleaner.
Lubricate all grease fittings.
Change the engine oil.
Replace the engine oil filter.
Replace the air filter element.
Check the reel bearing preload adjustment.
Torque the wheel lug nuts.
Replace the spark plugs.
Replace the fuel filter.
Check the engine RPM (idle and full throttle).
Check the valve clearance.
Replace moving hoses.
Replace the safety switches.
Drain/flush the fuel tank.
Drain/flush the hydraulic tank.
Replace the hydraulic oil and filter.
25
damage to the seals and bearings. After cleaning, it is
recommended the machine be inspected for possible
hydraulic fluid leaks, damage or wear to hydraulic and
mechanical components, and the cutting units checked for
sharpness. Also, lubricate the mow and lift pedal and brake
shaft assembly with SAE 30 oil or spray lubricant to deter
corrosion and help keep the machine performing
satisfactorily during the next mowing operation.
1