Identification And Ordering - Toro 04060 Operator's Manual

Maintenance
1
1. Shut-off valve
2. Bowl
22
Fig. 26
2
Fig. 27
IDENTIFICATION AND
ORDERING
MODEL AND SERIAL NUMBERS
The Greensmaster 1600 has two identification
numbers: a model number and a serial number.
These numbers are stamped into a plate located
on the rear of frame. In any correspondence con-
cerning the unit, supply the model and serial
numbers to ensure correct information and
replacement parts are obtained.
Note: Do not order by reference number if a parts
catalog is being used; use the part number.
To order replacement parts from an authorized
TORO Distributor, supply the following information:
1. Model and serial numbers.
2. Part number, description, and quantity of parts
desired.