5
Installing Front Weights
Parts needed for this procedure:
-
Front weight kit(s) as needed
Procedure
The Sand/Infield Pro traction unit complies with ANSI B71.4-2012 Standard at the time of production. However, when the
following attachments are installed on the machine additional weight is required to comply to the standards. Use the chart
below to determine the combinations of additional weight required. Order parts from your local Authorized Toro Distributor.
Attachment
Spiker kit (08755)
Rahn Groomer
QAS Utility Box
Note: Additional weight is not required if the machine is equipped with the Front Hydraulic Lift Kit, Model 08712.
Additional Front Weight
Required
50 lb.
50 lb.
50 lb.
14
Weight Kit Part Number
100-6442
100-6442
100-6442
Weight Description
8 x 6.5 lb plate weight
8 x 6.5 lb plate Weight
8 x 6.5 lb plate Weight
Qty.
1
1
1