Safety; Safe Operating Practices - Toro 08703 Operator's Manual

Safety

The Sand Pro traction unit complies with ANSI
B71.4-2004 Standards at the time of production.
However, when attachments are installed on the
machine additional weight is required to comply to the
standards.
Improper use or maintenance by the operator or owner
can result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay attention
to the safety alert symbol
Warning, or Danger—"personal safety instruction." Failure
to comply with the instruction may result in personal
injury or death.

Safe Operating Practices

The following instructions are adapted from ANSI
B71.4-2012.
Training
•
Read the operator's manual and other training material
carefully. Be familiar with the controls, safety signs, and
the proper use of the equipment.
•
If the operator or mechanic can not read the language
of is the owner's responsibility to explain this material
to them.
•
Never allow children or people unfamiliar with these
instructions to use or service the machine. Local
regulations may restrict the age of the operator.
•
Never operate while people, especially children, or pets
are nearby.
•
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
•
Do not carry passengers.
•
All drivers and mechanics should seek and obtain
professional and practical instruction. The owner is
responsible for training the users. Such instruction should
emphasize:
– the need for care and concentration when working
with ride-on machines;
– control of a ride-on machine sliding on a slope will
not be regained by the application of the brake. The
main reasons for loss of control are:
◊ insufficient wheel grip;
◊ being driven too fast;
◊ inadequate braking;
◊ the type of machine is unsuitable for its task;
◊ lack of awareness of the effect of ground
conditions, especially slopes;
, which means Caution,
◊ incorrect hitching and load distribution.
•
The owner/user can prevent and is responsible for
accidents or injuries occurring to himself or herself, other
people, or property.
Preparation
•
While operating, always wear substantial footwear, long
trousers, hard hat, safety glasses, and ear protection. Long
hair, loose clothing, or jewelry may get tangled in moving
parts. Do not operate the equipment when barefoot or
wearing open sandals.
•
Warning—Fuel is highly flammable. Take the following
precautions:
•
Replace faulty mufflers.
•
Evaluate the terrain to determine what accessories and
attachments are needed to properly and safely perform
the job. Only use accessories and attachments approved
by the manufacturer.
•
Check that operator's presence controls, safety switches
and shields are attached and functioning properly. Do not
operate unless they are functioning properly.
Safe Handling of Fuels
•
To avoid personal injury or property damage, use
extreme care in handling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other sources
of ignition.
•
Use only an approved fuel container.
•
Never remove fuel cap or add fuel with the engine
running.
•
Allow engine to cool before refueling.
•
Never refuel the machine indoors.
•
Never store the machine or fuel container where there is
an open flame, spark, or pilot light such as on a water
heater or on other appliances.
•
Never fill containers inside a vehicle or on a truck or
trailer bed with a plastic liner. Always place containers on
the ground away from your vehicle before filling.
•
Remove equipment from the truck or trailer and refuel it
on the ground. If this is not possible, then refuel such
equipment with a portable container, rather than from a
fuel dispenser nozzle.
•
Keep the nozzle in contact with the rim of the fuel tank
or container opening at all times until fueling is complete.
Do not use a nozzle lock open device.
•
If fuel is spilled on clothing, change clothing immediately.
•
Never overfill fuel tank. Replace fuel cap and tighten
securely.
4