Product Overview; Controls - Toro 22318 Operator's Manual

Product Overview

5
4
3
2
1
1. Mount plate
2. Tilt cylinder
3. Auxiliary hydraulic couplers
4. Loader arms
5. Hood

Controls

Become familiar with all the controls
start the engine and operate the traction unit.
6 3 1
G005160
1. Traction control levers
2. Attachment tilt lever
3. Loader arm lever
4. Auxiliary hydraulics lever
5. Speed selector lever
Key Switch
The key switch, used to start and stop the engine, has 3
positions: off, run, and start.
6. Fuel tank
7. Lift cylinder
8. Tow valve
9. Wheel
10. Operator platform
(Figure 7) before you
5 2 4
7 8 9
Figure 7
6. Throttle lever
7. Choke lever
8. Key switch
9. Hour meter/tachometer
17
16
15
6
14
7 13
8
12
9
11
10
Figure 6
11. Counterweight
12. Engine
13. Air cleaner
14. Thigh support
15. Control panel
To start the engine, rotate the key to the start position. Release
the key when engine starts and it will move automatically to
the run position.
To stop the engine, rotate the key to the off position.
Throttle Lever
Move the control forward to increase the engine speed and
rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke lever forward.
After the engine starts, regulate the choke to keep the engine
running smoothly. As soon as possible, move the choke lever
all the way rearward.
Note: A warm engine requires little or no choking.
Traction Control Levers
•
To move forward, move the traction control levers
forward. To move rearward, move the traction control
levers rearward.
•
To go straight, move both traction control levers equally.
•
To turn, move the lever located on the side you want to
turn back toward the neutral position while keeping the
other lever engaged.
12
16
4
8
G005287
16. Lift points
17. Handles