Maintenance; Recommended Maintenance Schedule(S) - Toro 04384 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first hour
After the first 8 hours
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 150 hours
Every 200 hours
Every 800 hours
Yearly
Every 2 years
Important: Refer to your engine operator's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition.
Maintenance Procedure
• Check the torque of the wheel nuts.
• Check the tension on the alternator belt.
• Check the torque of the wheel nuts.
• Change the engine oil and filter.
• Change the hydraulic oil filter.
• Check the engine RPM (at idle and full throttle).
• Check the engine oil.
• Clean debris off of the radiator screen and radiator. Clean hourly if conditions are
extremely dusty and dirty.
• Check the hydraulic fluid level.
• Drained any water from the fuel filter
• Check the reel-to-bedknife contact.
• Check the hydraulic lines and hoses.
• Check the battery electrolyte level. (If the machine is in storage, check every 30
days.)
• Lubricate the bearings and bushings
• Check the battery cable connections.
• Change the engine oil and filter.
• Check the torque of the wheel nuts.
• Service the air cleaner filter (more frequently when operating conditions are dusty
or dirty).
• Replace the fuel filter.
• Change the hydraulic oil, hydraulic oil filter, and tank breather.
• Check the engine RPM (at idle and full throttle).
• Check the valve clearance.
• Burnish the brakes
• Check the fuel lines and connections.
• Drain and flush cooling system
• Replace moving hoses.
31