Installing The Seat - Toro 74450TE Setup Instructions

5

Installing the Seat

Parts needed for this procedure:
1 Lefthand armrest
1 Flat washer
1 Bolt, (1/2 x 3-1/4 inches)
1 Plastic flat washer
1 Spacer
Procedure
1. Install the left armrest to the seat with a flat washer,
plastic flat washer, spacer and a bolt (1/2 x 3-1/4
inches).
g012850
Figure 11
1. Seat
2. Left armrest
3. Plastic flat washer
2. Remove the bolt and nut from the seat frame.
3. Remove the nuts from the studs under the seat.
4. Place the spacers on the seat mounting frame with
the bent ends facing up. The slot in the spacer is
installed to the rear of the seat.
1 2 3 4 5
6
4. Flat washer
5. Bolt, (1/2 x 3-1/4 inches)
6. Spacer
1
3
1. Spacer
2. Slot– install to the rear of
seat
5. Install the seat and spacers to the seat frame with the
previously removed nuts.
6. Secure the seat rod to the seat with the bolt and nut.
5
2
g012851
Figure 12
3. Bent ends
g012851
Figure 13