Toro 31598N Operator's Manual page 23

H / L (Hi/Low) Speed Range Indicator
This display indicates which speed range has been selected
(Figure 16).
Air Intake Heater Indicator
This display indicates when the system is pre heating
16).
Traction Assist Indicator
This display indicates when the traction assist is engaged
(Figure 16).
Machine Hours Indicator
This display shows the total hours that the machine has been
operated (Figure 17).
Figure 17
1. Tachometer
2. Hydraulic oil temperature
Tachometer
This display shows the engine operating speed in RPM
(Figure 17).
Battery Voltage
This display shows the battery voltage
Hydraulic Oil Temperature Indicator
This display indicates the hydraulic oil temperature
17).
Service Due Indicator
This display indicates the time until the next regular service
interval (Figure 17).
(Figure
3. Battery voltage
4. Service due
(Figure 17).
(Figure
Note: When service has been performed, make sure to reset
the indicator.
Resetting the Service Interval Indicator
1. Press and hold the far right button on the Info Center.
2. The Main Menu screen will come up. Select SERVICE
using the 2 buttons on the left; press the button below
the right arrow to continue.
3. Select HOURS and press the button below the right
arrow.
4. Press the button below RESET HOURS.
5. Select the HOURS for the appropriate next service
time and press the button below the right arrow. A
check mark will appear once it has been reset. When
finished, press the button below the exit icon (picture
of a door open) to return to the main screen, or press
cancel to exit.
Engine Air Filter Restriction Indicator
This display (Figure 18) indicates when the engine air filter
is restricted.
Alarm (InfoCenter)
The InfoCenter's alarm sounds when:
•
an engine fault is received
•
an advisory or fault is received from the TEC controllers
•
starting the machine
Info Center
Fault Indicators
Stop -If the driver receives a STOP indication, the driver
should cease operation of the machine and the engine as
quickly and as safely as possible to reduce damage to the
engine (Figure 19).
23
g021 157
Figure 18