Toro 31598N Operator's Manual page 13

1. Read the Operator's Manual for information on maintenance.
125–5263
1. Read the Operator's Manual for information on fuses.
130–2449
1. Read the Operators Manual; to start the engine, move the
traction pedal to Neutral, apply the brake, move the throttle
switch to low, turn the ignition key to Preheat. When the
Wait to Start Advisory clears on the Info Center then turn
the ignition key to Start.
2. Read the Operators Manual; to stop the engine, move the
throttle lever to slow, disengage the PTO, set the parking
brake, wait 5 minutes, turn the ignition key to Stop, and
remove the key; read the Operators Manual.
3. Read the Operators Manual.
4. To engage the PTO, pull up on the PTO switch.
5. To disengage the PTO, push down on the PTO switch.
6. To switch the transmission to high speed, fully raise the
attachments and switch the speed control to High.
13
114-0846