Table of Contents
Advertisement
4. Clean the dirt ejection port located in the removable
cover. Remove the rubber outlet valve from the cover,
clean the cavity and replace the outlet valve.
5. Install the cover orienting the rubber outlet valve in a
downward position—between approximately 5:00 to
7:00 when viewed from the end.
6. Secure the latches
(Figure
Changing the Engine Oil and
Filter
Service Interval: After the first 50 hours
Every 150 hours
1. Remove the drain plug and let oil flow into a drain pan.
When the oil stops, install the drain plug
1. Drain plug
2. Remove the oil filter
clean oil to the new filter gasket.
1
1. Oil filter
45).
(Figure
1
Figure 46
(Figure
47). Apply a light coat of
Figure 47
3. Screw the filter on by hand until the gasket contacts
the filter adapter, then tighten 1/2 to 3/4 turn further.
Do not overtighten.
4. Add oil to the crankcase; refer to
Oil (page
5. Dispose of the used oil properly.
46).
g014754
g014615
39
Checking the Engine
25).
Advertisement
Table of Contents
