Toro 04358 Greensmaster 3150 Operator's Manual page 32

•
Lift cylinders (3) (Figure 40)
•
Traction pedal (Figure 41)
•
Speed selector linkage (Figure 42 and Figure 43)
Figure 40
Figure 41
Figure 42
To grease the machine, complete the following procedure:
1. Wipe the grease fitting clean so foreign matter cannot
be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing until the
grease is visible. Wipe up excess grease.
3. Apply grease to the reel motor spline shaft and onto the
lift arm when the cutting unit is removed for service.
4. Apply a few drops of SAE 30 engine oil or spray
lubricant (WD 40) to all pivot points daily after
cleaning.
32
G017145
Figure 43