Disconnecting the Spark-plug
Wire
Before performing any maintenance on the engine, belt, or
cutting blades, disconnect the spark-plug wire from the spark
plug
(Figure
17).
1
Figure 17
1. Spark-plug wire
Lubrication
Lubricating the Slicer-shaft
Bearings
Service Interval: Every 25 hours—Grease the slicer-shaft
1. Stop the engine, wait for all moving parts to stop, and
remove the spark-plug wire.
2. Engage the parking brake.
3. Lubricate the fittings
NLGI grade #2 multi-purpose grease.
G021786
1. Grease fitting
19
bearings.
(Figure
18) with 1 or 2 pumps of
Figure 18