Safety And Instructional Decals - Toro 23510 Operator's Manual

•
Watch for ditches, holes, rocks, dips, and rises that change
the operating angle, as rough terrain could overturn the
machine.
•
Always avoid sudden starting or stopping on a slope. If
the tires lose traction, disengage the blades and proceed
slowly off the slope.
Maintenance and Storage
•
Stop the machine, stop the engine, wait for all moving
parts to stop, raise the blades, and disconnect the
spark-plug wire before adjusting, cleaning, or repairing.
•
Clean grass and debris from the blades, drives, muffler,
and engine to help prevent fires. Clean up oil or fuel
spillage.
•
Let the engine cool before storing and do not store near
flame.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Cutting/dismemberment hazard of hands and feet, rotating
knives/blades—stay away from moving parts.
1. Parking
brake—disengaged
93-7321
115-9625
2. Parking brake—engaged
•
Shut off the fuel while storing or transporting on trailers.
Do not store fuel near flames or drain indoors.
•
Park the machine on level, hard ground. Never allow
untrained personnel to service it.
•
Use jack stands or safety latches to support components
when required.
•
Carefully release pressure from components with stored
energy.
•
Remove the spark-plug wire before making any repairs.
•
Keep hands and feet away from moving parts. If possible,
do not make adjustments with the engine running.
•
Keep all parts in good working condition and all hardware
tightened. Replace all worn or damaged decals.
•
Use only Toro-approved attachments. The warranty
may be voided if the machine is used with unapproved
attachments.
1. Lower seed flow rate
5
116-8535
2. Higher seed flow rate