Maintenance; Recommended Maintenance Schedule(S); Premaintenance Procedures; Disconnecting The Spark Plug Wire - Toro 23511 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 25 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 200 hours
Every 300 hours
Yearly or before storage
Premaintenance
Procedures
Disconnecting the Spark Plug
Wire
Before performing any maintenance on the engine, belts, or
cutting blades, disconnect the spark plug wire from the spark
plug (Figure 15).
Maintenance Procedure
• Change the engine oil.
• Check the engine oil level.
• Clean debris form the machine.
• Inspect the air cleaner elements.
• Check the belt tension. If the engine is working but the cutting blades seem
underpowered, check the belt tension.
• Check the cutting blades for wear or damage.
• Check the blades for wear or damage.
• Check for loose fasteners.
• Clean the air filter elements. Clean them more frequently in dusty operating
conditions.
• Change the engine oil.
• Clean the sediment cup.
• Inspect, clean, and adjust the spark plug; replace it if necessary.
• Replace the spark plug.
• Replace the paper air cleaner element. Replace it more frequently in dusty operating
conditions.
• Touch up chipped paint.
1. Spark plug wire
16
G019426
Figure 15