Yamaha DM 2000 Owner's Manual page 78

64
Chapter 6—Input & Output Patching
Patching Omni Outs
Bus Outs, Aux Sends, Matrix Sends, the Stereo Out, Input or Output Channel Insert Outs,
or Surround Monitor Channels can be patched to the Omni Outs. Omni Outs can be
patched to Direct Outs on the Direct Out Destination pages (see page 65).
When an Omni Out is patched to a Direct out (see page 65), and that Direct Out is assigned
on an Input Channel Routing page, the Omni Out patch cannot be changed here.
Output Channel Inserts Ins
AD Inputs, Slot Inputs, internal effects processor outputs, or Digital or Analog 2TR Inputs
can be patched to the Output Channel Insert Ins. The left and right channels of the Matrix
Sends and the Stereo Out can be patched individually.
In addition to using the cursor buttons, Patch parameters can also be selected by using the
[SEL] buttons and the Master Layer.
DM2000—Owner's Manual