Settings Aux Send Master Levels; Grouping Master Faders; Sending Aux Sends To Matrix Sends; Delaying Aux Send Masters - Yamaha DM 2000 Owner's Manual

96
Chapter 10—Aux Sends

Settings Aux Send Master Levels

Aux Send Master levels can be set as follows.
Press the LAYER [MASTER] button to select the Master Layer.
1
2 Press the FADER MODE [FADER] button to select the Fader mode.
Use faders 9–20 to set the Aux Send Master levels.
3
Refer to the legend on the right side of the faders when setting Aux Send Master
levels.

Grouping Master Faders

Aux Send Master faders can be grouped with the faders of other Output Channels.
See "Grouping Output Channel Faders" on page 122 for more information.

Sending Aux Sends to Matrix Sends

Aux Send Master signals can be sent to the Matrix Sends. See "Matrix Sends" on page 97 for
more information.

Delaying Aux Send Masters

Each Aux Send Master features a Delay function. See "Delaying Channel Signals" on page
117 for more information.

Inserting GEQs

Internal GEQs can be inserted into the Aux Send Masters. See "About the GEQs" on page
155 for more information.

Soloing Aux Sends

Aux Sends can be soloed. See page 118 for more information.

Pairing Aux Sends

Aux Sends can be paired for stereo operation. See "Pairing Channels" on page 120 for more
information.

Viewing Aux Send Master Settings

Parameter and fader settings for each Aux Send Master can be viewed and set on the View
pages. See "Viewing Channel Parameter Settings" on page 124 and "Viewing Channel Fader
Settings" on page 125 for more information.

Copying Aux Send Master Settings

Aux Send Master settings can be copied to other Aux Sends by using the Channel Copy
function. See "Copying Channel Settings" on page 129 for more information.

Naming Aux Send Masters

Aux Send Masters can be named for easy identification. See "Naming Channels" on page
130 for more information.
DM2000—Owner's Manual
10 0
5 5
0 10
5 15
10 20
15 30
20 40
30 50
40 60
50 70