Yamaha DM 2000 Owner's Manual page 290

276
Appendix A: Parameter Lists
REV+CHORUS
One input, two output reverb and chorus effects in parallel.
Parameter
INI. DLY
REV TIME
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV/CHO
FREQ.
AM DEPTH
PM DEPTH
MOD. DLY
WAVE
SYNC
NOTE
1.
REV->CHORUS
One input, two output reverb and chorus effects in series.
Parameter
INI. DLY
REV TIME
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV BAL.
FREQ.
AM DEPTH
PM DEPTH
MOD. DLY
WAVE
SYNC
NOTE
1.
DM2000—Owner's Manual
Range Description
0.0–500.0 ms Initial delay before reverb begins
0.3–99.0 s Reverb time
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
THRU,
High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Reverb and chorus balance (0% = all reverb, 100% = all cho-
0–100%
rus)
0.05–40.00 Hz Modulation speed
0–100% Amplitude modulation depth
0–100% Pitch modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
OFF/ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.
Range Description
0.0–500.0 ms Initial delay before reverb begins
0.3–99.0 s Reverb time
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
THRU,
High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Reverb and chorused reverb balance (0% = all chorused
0–100%
reverb, 100% = all reverb)
0.05–40.00 Hz Modulation speed
0–100% Amplitude modulation depth
0–100% Pitch modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
OFF/ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.