Yamaha DM 2000 Owner's Manual page 54

40
Chapter 3—Operating Basics
Delay Feedback Gain, Delay Mix & EQ Gain Parameters
On/Off & Pre/Post Parameters
EQ On/Off, Phase On/Off, Insert On/Off, EQ Type, Gate On/Off, Comp On/Off, Aux Send
On/Off, Matrix Send On/Off, Aux Send Pre/Post, Matrix Send Pre/Post.
AD824 Input Gain, Insert In Gain & Scene Fade Time Parameters
AD824 Input Gain, AD824 Insert In Gain, Scene Fade Time.
Other Parameters
Delay Time, EQ Q, EQ Frequency, Comp Threshold, Comp Ratio, Comp Attack, Comp
Release, Comp Out Gain, Comp Knee, Gate Threshold, Gate Range, Gate Attack, Gate
Hold, Gate Decay, Compander Width.
Surr Pan Wheel
No Assign
When the Encoders are assigned to the No Assign, Input Patch, Insert In Patch, Insert Out
Patch, or Direct Out parameter, the Encoder displays are inactive.
DM2000—Owner's Manual
Negative value
( indicates 0%, ±0 dB)
On/Pre
Minimum
(Off when Fade Time is minimum)
Minimum Other position
0%, ±0 dB
( indicates at 0%, ±0 dB)
Off/Post
Other value
Other position
Positive value
Maximum
Maximum