Yamaha DM 2000 Owner's Manual page 34

20
Chapter 2—Control Surface & Rear Panel
D
STORE button
This button is used to store the current Scene to the selected Scene memory. See "Storing &
Recalling Scenes with the SCENE MEMORY Buttons" on page 159.
E
Scene Up/Down buttons
These buttons are used to select Scene memories. Pressing the Scene Up [ ] button incre-
ments the selection; pressing the Scene Down [ ] button decrements the selection. Holding
down a button causes the selection to increment/decrement continuously. See "Storing &
Recalling Scenes with the SCENE MEMORY Buttons" on page 159.
F
RECALL button
This button is used to recall the selected Scene memory. See "Storing & Recalling Scenes
with the SCENE MEMORY Buttons" on page 159.
AUTOMIX
The small text labels below the AUTOMIX buttons apply to the DAW Remote Layer. See
"About Remote Layers" on page 217 for more information.
A
AUTOMIX DISPLAY button
This button is used to select the following pages: Automix Main, Automix Memory, Input
Channel Fader Edit, Event Copy, and Event Edit. See "Automix" on page 164.
B
ENABLE button
This button is used to enable and disable the Automix function. It works in unison with the
ENABLED/DISABLED button on the Automix Main page. See "Automix Main Page" on
page 165.
C
REC button
This button is used with Automix recording. It works in unison with the REC button on the
Automix Main page. See "REC" on page 168 for more information.
D
ABORT/UNDO button
This button is used to abort Automix recording or playback. It works in unison with the
ABORT button on the Automix Main page. See "ABORT" on page 168. When not recording
or playing an Automix, it's used to undo the Automix, in unison with the UNDO button on
the Automix Main page. See "UNDO" on page 167 for more information.
E
AUTO-REC button
This button is used to arm Automix Auto Recording function. It works in unison with the
AUTO REC button on the Automix Main page. See "AUTO REC" on page 168 for more
information.
F
RETURN button
This button is used to select the Automix Edit Out mode. It works in unison with the EDIT
OUT RETURN buttons on the Automix Main page. See "EDIT OUT" on page 166 for more
information.
DM2000—Owner's Manual
2 3 4 5 6 7 8
1
AUTOMIX
DISPLAY
ENABLE REC ABORT/ AUTO-
UNDO REC
SUSPEND WRITE TOUCH LATCH
OVERWRITE
FADER ON PAN SURROUND
9
RETURN RELATIVE TOUCH
SENSE
READ TRIM OFF
AUX AUX EQ
ON