Step 5: Conservation Periods - Duke Energy EnergyWise Business User Manual

Step 5: Conservation Periods

The EnergyWise Business automatic electricity conservation program may be activated for a few hours on up to 10 summer
weekday afternoons when electricity use is at its highest. During these "conservation periods," your cooling system's
compressor cycles each hour for the amount of time you chose when you enrolled.
Your EnergyWise Business thermostat will keep you informed when a conservation period occurs. The message display and
green LED indicator will signal when your compressor is resting and when it is active during a conservation period. The
message and indicator will change during the period coincident with your cycling level.
A. Conservation (Disabled) Period Displays
1. The green LED indicator remains lit throughout the conservation period.
2. The message CONTROL ACTIVE appears in the message display rotation.
3. A message showing the approximate time remaining in the conservation period also appears in the message
display rotation.
B. Cooling (Enabled ) Period Displays
1. The green LED indicator flashes 1/2 second off, 1- 1/2 seconds on when the thermostat is allowed to run normally
during the conservation period.
2. The message CONTROL EVENT appears in the message display rotation.
3. A message showing the approximate time remaining in the conservation period also appears in the message
display rotation.
EnergyWise Business Wi-Fi Thermostat User's Manual
®
EnergyWise Business Portal
®
duke-energy.com/EWBportal
21