Step 5: Conservation Events - Duke Energy H?M Energy Manager Homeowner's Manual

Step 5: Conservation Events

The HōM™ Energy Manager automatic electricity conservation program may be activated for a few hours on up to 10
summer weekday afternoons when electricity use is at its highest. During these "conservation periods", your cooling
system's compressor cycles each hour for the amount of time you chose when you enrolled.
Your HōM Energy Manager thermostat will keep you informed when a conservation period occurs. The message display and
green LED indicator will signal when your compressor is resting and when it is active during an event. The message and
indicator will change during the period coincident with your cycling level.
A. Conservation (Disabled) Phase Displays
1. The green LED indicator remains lit throughout the conservation phase.
2. The message CONTROL ACTIVE appears in the message display rotation.
3. A message showing the approximate time remaining in the conservation event also appears in the message
display rotation.
B. Cooling (Enabled ) Phase Displays
1. The green LED indicator flashes 1/2 second off, 1- 1/2 seconds on when the thermostat is allowed to run normally
during the conservation event.
2. The message CONTROL EVENT appears in the message display rotation.
3. A message showing the approximate time remaining in the conservation event also appears in the message
display rotation.
HōM™ Energy Manager Web-Programmable Thermostat Homeowner's Manual
HōM Energy Manager Portal
homenergymgr.com/portal/engagement
21