Full (Full) Lockout - Duke Energy EnergyWise Business User Manual

Step 4: Using the Keypad Lock (continued)
B. Full (FULL) Lockout
Prevents any type of user activity through the keypad except for turning on the backlight (if it was previously
enabled). The user cannot change program settings, mode of operation, fan mode of operation or set/end a hold.
To set a full lockout:
1. At the main operating screen,
press and hold the
buttons simultaneously
for 3 seconds.
3. Enter a four-digit security code
of your choosing. This code
will be required to unlock the
keypad in the future. To enter
the code, press the
button to change the first
digit, and then press Next.
Repeat the above process for
the last three digits, and then
press the Done button.
NOTE: You will set your four-digit security code the first time you set a keypad lockout. The code will remain the same
until you change it manually. There is no way to unlock the keypad lock if you forget your code, so choose a number
that has meaning and notate it below in the space provided.
EnergyWise Business Wi-Fi Thermostat User's Manual
®
and
or
Code
EnergyWise Business Portal
®
duke-energy.com/EWBportal
2. The display will change to the
KEYPAD LOCK TYPE screen
with OFF flashing. Select
FULL by pressing the
or button. Press Next.
4. Your security code is now
saved and the keypad lock is
now active. The thermostat will
return to the main operating
screen and display a temporary
KEYPAD LOCKED message.
The screen will now constantly
display a lock icon indicating
an active keypad lock.
Date
19