Duke Energy EnergyWise Business User Manual page 9

Step 2: Main Menu and Thermostat Settings (continued)
5. Use a Wi-Fi-enabled smartphone,
tablet or computer to connect to
the thermostat. Open the Wi-Fi
settings menu on your device and
select the THERMOSTAT name
displayed in step 4.
7. Open the Web browser on your device. If your browser is set to automatically open
a Web page, the IntelliTEMP configuration page should automatically appear.
8. If the settings page does not appear after a few seconds, type "directlink/settings"
in the address bar, and then press ENTER. If the settings page still does not
appear, on the thermostat Main Menu screen, press the button next to Menu.
Then press the button next to Other. The thermostat will display the WI-FI
SETTINGS menu. Press the button next to Select. The message area of the
thermostat will display the Wi-Fi network name (SSID) to which you are
currently connected. Press the button next to Next. The IP address of your
device will be displayed in the thermostat's message area. In the browser bar of
your device, type "http://" followed by the IP address displayed on the
thermostat. Press ENTER.
9. Use the pull-down
on the settings page
to select your user
network name.
11. Enter the network password for your network.
12. Once all fields are filled in correctly, click on the Save button.
EnergyWise Business Wi-Fi Thermostat User's Manual
®
EnergyWise Business Portal
®
duke-energy.com/EWBportal
6. You may receive a notification
that you are connected to a
non-secure network. Select OK
or CONTINUE.
10. If your Wi-Fi router is
set to hide the network
name or your network
is not listed in the
pull-down, click on the
link below the pull-
down to display the
manual settings page.
9