Permanent Hold; Ending A Hold - Duke Energy EnergyWise Business User Manual

Step 3: How to Set a Temperature "Hold" (continued)
3. The current time display in the center of the screen will begin
flashing. Press the
temperature hold to end.
You may adjust the time in 15-minute increments and set a
timed temporary hold for up to 24 hours. Press Select when the
desired time is displayed. Once the hold time is set, the display
returns to the current time.
C. Permanent Hold
A permanent hold lasts until you manually end it. To set a permanent hold:
Press the or
The word PERM will display for 5 seconds after you set the hold
temperature. Press the button next to it.
D. Ending a Hold
To end a temporary or timed temporary hold before the end of its
assigned duration, or to end a permanent hold, press the button
next to the RUN display. This ends the active hold and returns the
thermostat to its program schedule.
NOTE: When setting a temporary or timed temporary hold, failure
to press the button next to the TIMED display within 5 seconds
will cause a default to temporary hold. When setting a
permanent hold, failure to press the button next to the PERM
display will also cause a default to temporary hold.
EnergyWise Business Wi-Fi Thermostat User's Manual
®
button to set the time you want the
button to the desired temperature.
EnergyWise Business Portal
®
duke-energy.com/EWBportal
17