Duke Energy EnergyWise Business User Manual page 8

Step 2: Main Menu and Thermostat Settings (continued)
5. Press the
advance the display to
RESET WI-FI.
STEP 2: Connect to a Wi-Fi Network
In the configuration mode, the EnergyWise Business thermostat acts like a Wi-Fi access point. This allows the
homeowner to use any Internet-enabled device to connect to the thermostat and configure it to use their Wi-Fi
settings with a standard Web browser.
NOTE: If any settings on your Internet router are changed at any time during this step, you must cycle the power to
your thermostat and restart this procedure.
1. On the thermostat Main Menu
screen, press the Menu button.
3. Press the Select button.
If you continue to have connectivity problems, please call the EnergyWise Business customer service center
at 866.821.8423.
EnergyWise Business Wi-Fi Thermostat User's Manual
®
button to
EnergyWise Business Portal
®
duke-energy.com/EWBportal
6. As RESET WI-FI is flashing,
press the Select button.
2. Press the Other button. The
thermostat will display the
WI-FI SETTINGS menu.
4. The message area of the
thermostat will display
THERMOSTAT followed by
the last four digits of the
thermostat's Wi-Fi module
serial number. This is the
network name (SSID) you
will use to connect to the
thermostat.
8