Full (Full) Lockout - Duke Energy H?M Energy Manager Homeowner's Manual

Step 4: Using the Keypad Lock (continued)
B. Full (FULL) Lockout
Prevents any type of user activity through the keypad except for turning on the backlight (if it was previously
enabled). The user cannot change program settings, mode of operation, fan mode of operation or set/end a hold. To
set a full lockout:
1. At the main operating screen,
press and hold the
buttons simultaneously
for 3 seconds.
3. Enter a 4-digit security code of
your choosing. This code will
be required to unlock the
keypad in the future. To enter
the code, press the
button to change the first
digit, then press Next. Repeat
the above process for the last
3 digits, then press the
Done button.
NOTE: You will set your four-digit security code the first time you set a keypad lockout. The code will remain the same
until you change it manually. There is no way to unlock the keypad lock if you forget your code, so choose a number
that has meaning and notate it below in the space provided.
HōM™ Energy Manager Web-Programmable Thermostat Homeowner's Manual
and
or
Code
HōM Energy Manager Portal
homenergymgr.com/portal/engagement
2. The display will change to the
KEYPAD LOCK TYPE screen
with OFF flashing. Select FULL
by pressing the or
button. Press Next.
4. Your security code is now
saved and the keypad lock is
now active. The thermostat will
return to the main operating
screen and display a temporary
KEYPAD LOCKED message.
The screen will now constantly
display a lock icon indicating
an active keypad lock.
Date
19