Transmitting A Document Using Memory (Memory Tx) - NEC NEFAX 805 Operation Manual

Basic FAX Operation (2)
4. Basic FAX Operation (2)

4.1. Transmitting a Document Using Memory (Memory TX)

Memory TX lets the machine scan the contents of the document to be transmitted at high
speed into its built-in memory and transmit it to the other party. (The procedure in which
you directly transmit the document without using memory is called "Direct
Transmission")
1. Check that the message display is shown
Fax screen.
If not, press the Copy/Fax key to switch.
2. Press the Memory TX key.
The Memory TX indicator lights up, indicating that the
Memory TX function is selected, otherwise the Direct
Transmission is selected.
This function is used to set the TX mode of the machine, two options are available:
Choices Available
Memory TX
ADF TX (Direct Transmission)
NOTE:
• In Memory Transmission Mode, you can retrieve your original
document sooner than you can do in ADF TX (Direct Transmission)
Mode.
3. Make the necessary settings other than Memory TX, load the document, and then dial
the other party.
Description
When set in this mode, documents are
scanned into memory for transmission and
dialing starts after the first page is scanned
Memory TX
(Quick TX).
When set in this mode, documents are
scanned for transmission after connection
has been made to the receiving unit. (When
the available memory is insufficient, please
Memory TX
select ADF TX for a successful
transmission)
If the line is not available, the message
"LINE IS BUSY" will shown, and the
machine attempts to redial again later.
4-1
JAN. 04 02:30 100%
-SET DOC. FACE UP-
Memory TX
Press the key