Table of Contents
Advertisement
Troubleshooting
* CAUTION! *
PAPER MISFEED
PAPER SIZE ERROR
* CAUTION! *
TONER EMPTY
* CAUTION! *
ADF COVER OPEN
SERVICE CALL
( CXXXX )
* REDIAL ALL FAILED *
* COMM.ERROR *
* NOT REGISTERED! *
* WRONG NUMBER SET *
Paper pick up miss-feed
The paper installed is not
correct
Run out of Toner
The ADF cover is open
A hardware related error
occurred.
The document is not
transmitted to the other
party even through
repeated auto redial.
An error has occurred and
communication was
unsuccessful.
There is no destination
information registered in
the One Touch key or
Speed Dial you have just
pressed.
The date or time has been
set incorrectly.
11-2
1.
Remove jam papers if
necessary.
2.
Open and close main unit
cover. P 11-10
Be sure you have installed
the correct paper size, then
press any key to release the
ERROR state, and then
press Start key to resume
this machine. After
warming up, this machine
would print the last copy
again.
Or, change the paper size
setting. P 7-8
Replace new Toner.
Close the cover of ADF.
Try turning the power OFF
then ON.
If this error is displayed
again, contact your service
agency
Press the Stop key, then try
another transmission
sequence.
At transmission
Press the Stop key, and
then the Yes key. Then try
another transmission
sequence.
At reception
Ask the other party to try
another transmission.
Select the One Touch key
or Speed Dial, which
contains the information of
the destination you are
trying to send.
Or register a new One
Touch Dial or Speed Dial .
P 6-5
Make the correct setting.
P 1-19
Advertisement
Table of Contents
