NEC NEFAX 805 Operation Manual page 127

Using the Enhanced Utilities (1)
5.BATCH TX
One Touch Dial key can be pre-programmed with Batch TX time. This allows multi jobs to
be transmit at the same time by one transmission.
For ---- 4.TX Operation:
4. CLOSED NETWORK
Limits the parties to which you can transmit a document to only those registered for One
Touch Dial, Speed Dial, and Phone Book. When this feature is turned ON, you can no longer
transmit a document to any party that has not been registered for One Touch Dial, Speed
Dial, or Phone Book. This provides a means of controlling machine communication.
6. HEADER
Sends the receiving destination your name, fax number, and other data for a document
transmitted.
This information is printed at the top of each page. This lets the receiving party identify
where the document came from, when it came in and how many pages it contains.
For ---- 5.RX Operation:
1. MEMORY RX MODE
Stores the contents of a received document into memory. The document is not printed unless
the machine receives a print command that may be a timer or password. The timer print
command causes the machine to start printing the document stored in memory when the
specified time arrives. The password print command, on the other hand, causes the machine
to start printing when a password is input. This feature provides a means of controlling the
documents received through the fax.
3. TWO PAGE PRINT
Prints two copies of a received document automatically. This feature eliminates the need for
making copies of the document after printing.
6. CLOSED NETWORK
Limits the parties from which you can receive a document to only those registered for One
Touch Dial, Speed Dial, and Phone Book. When this feature is turned ON, you can no longer
receive a document from any party that has not been registered in One Touch Dial, Speed
Dial, or Phone Book. This provides a meaning of controlling reception of documents through
the fax machine.
8. FOOTER
Prints on each page of the received document the name, date, time, communication number
and page number of the received document. By printing an Activity Report using the Session
number, you can identify where the document came from. This feature provides a means of
controlling reception of documents through the fax machine.
6-3