Setting Power Save Off; Setting Print Density - NEC NEFAX 805 Operation Manual

Using the Enhanced Utilities (2)

7.1.3 Setting POWER SAVE OFF

This function allows the user to set Power Save OFF, if you enable this setting the
machine will not automatically enter power saving mode at a specified time.
1. Press the Utility key then the message
"MACHINE SETTING" appears.
2. Press "3"of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press ◄ or ► key to select Disable or Enable
as the default setting.
Then press Yes key.
4. Press No/Clear key, back to the initial state.

7.1.4 Setting PRINT DENSITY

Set the print density according to your needs. There are seven density levels ranging from
Light to Dark.
1. Press the Utility key then the message
"MACHINE SETTING" appears.
MACHINE SETTING?
OK=YES / or 1-7
3 POWER SAVE OFF
* DISABLE
◄ , ► & YES
MACHINE SETTING?
OK=YES / or 1-7
MACHINE SETTING?
OK=YES / or 1-7
7-5
Utility
▲
▼
DEF
3
ENABLE
Yes
No
C
▲
▼
Utility
▲
▼