NEC NEFAX 805 Operation Manual page 118

Using the Function Utilities
Use the numeric key to input the polling ID.
For example: 1234
ABC
1 2
If you input a wrong number press the No/Clear key to clear
this entry and input the ID again.
NOTE: If you do not have the ID of the remote fax unit, you must to contact
the remote fax operator for this information.
5. Press the Yes key.
Then the message appears to ask for the next
polling RX destination. Repeat the procedure
step 4 to 5, until all the polling RX
destinations have been specified.
6. Press the Start key to finish the input operation.
Then the message asks if you want to check
these destinations.
If you want to check the destinations you
inputted, press the Yes key. The display
appears the first destination.
Press Yes key to accept this entry, then the
display shows the next destination.
If you want to delete this destination, press
the No/Clear key.
Do it until all entries have been checked. Then press the Start key.
7. Press the Start key to
perform the Polling RX
function.
DEF GHI
3 4
Start
5-24
POLLING ID =1234
OK=YES (DEL=NO)
No
C
POLLING ID =_
OK=YES
Yes
NO.002 =_
(Fin.=START)
Start
CHECK DESTINATIONS?
OK=YES (RX=START)
NO.001=123456
OK=YES (DEL=NO)
NO.002=010101
OK=YES (DEL=NO)
(123456
-SET DOC. FACE UP-
) 100%