NEC NEFAX 805 Operation Manual page 103

Using the Function Utilities
2. If the specified destination is correct, press the Yes key.
The display is changed to the next destination
specifying display.
When you want to clear the specified destination, press the
No/Clear key.
3. To continue specifying fax numbers with the Numeric keys, repeat the operation of
step 1 and 2.
4. When all the receiving parties have been
selected for a broadcast, press the Start key.
Checking the Selected Destinations
The receiving parties you have selected can now
be checked to ensure that the correct
destinations have been selected.
1. Press the Yes key.
Or you can skip checking the destinations selected by
pressing the Start key, which will begin the Broadcast
transmission procedure immediately.
2. To check selected destinations press the Yes key.
The Message Display first shows the
receiving party specified for 001.
NO.002= _
NO.016= _
Start
CHECK DESTIINATIONS ?
OK = YES (TX= START)
Start
NO.001= JAPAN(TOKYO)
OK = YES
5-9
Yes
(Fin.= START)
No
C
(Fin.= START)
Yes
Yes
(DEL= NO)