Using The Channel (Ch) Button; Checking Signal Information And Status Of The Main Unit - Canon DP-V2410 Instruction Manual

Using the Channel (CH) Button

You can assign channels (various settings related to input signal) to the CH buttons on the video display and switch
channels instantly.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings" → "Function/Channel Button" → "Display Channel" and press the jog dial to
determine the selection.
A new window opens and displays button names CH1 to CH3.
3. Select the name of the button using the jog dial and press the jog dial to determine the selection.
The selection frame moves to next OSD menu level.
4. Select the channel to assign using the jog dial.
See "Channel Settings" (
5. Press the jog dial to determine the selection.
The setting is confirmed.
The following content is assigned to channel buttons on the video display by factory default.

Checking Signal Information and Status of the Main Unit

The video display is equipped with a banner function which displays signal information or the status of the main unit.
1. Press the jog dial when the OSD menu is closed.
The channel name, signal information, and status of the main unit will be displayed in the banner. It will automatically
disappear after 6 seconds.
Note
• For more detailed signal information, please refer to the section on "Signal Information" (
• The "Detecting sync." banner will continue to appear until the input signal is synchronized.
43) for the configurable settings.
CH
Input Configuration
Select Input Signal
Format
Internal Sync
Channel Name
Picture Mode
Color Range
CH1 CH2
3G/HD-SDI HDMI
Automatic Automatic
Automatic Automatic
Off Off
(Blank) (Blank)
ITU-R BT.709 ITU-R BT.709
Automatic Automatic
CH3
3G-SDI RAW
Automatic
Automatic
Off
(Blank)
Canon Log
Automatic
65).
Operating the Video Display 27