Canon DP-V2410 Instruction Manual page 64

Item
Export/Import
Export
Import
Power on Setting
Reset All Settings
64 OSD Menu
Setting Options (underline indicates factory default)
Sets the export/import main menu settings.
Note
• The following settings cannot be exported or imported. This is also true when "All" is selected.
- "Calibration" under "Adjustment" (including calibration results)
- "Zoom" and "Frame Hold" under "Display Settings"
- "Test Pattern" and "Monochrome/Blue Only/Red Off/Green Off/Blue Off" under "Function
Settings", "Frame Hold" under "Screen Capture"
- "Date/Time", "Fan Stop", "Export/Import" and "Power on Setting" under "System Settings"
• Data exported from this video display cannot be imported to other Canon video displays
except DP-V2410.
Target: Select the export destination.
USB: Export to a USB memory
User 1-3: Export to the built-in memory of the main unit
Filename: Factory default is "dinfo_dpv2410.dat". You can change the name of the file to be
exported to the USB memory within 16 one-byte characters including alphabetical
characters, numbers, and symbols.
Execute: Performs export.
Target: Specify the destination to save the file to be imported.
USB, User 1-3
Filename: Displays files with the extension ".dat" so you can select from among them.
Settings (All, Adjustment, Channel Settings, Display Settings, Audio Settings, Marker
Settings, Function Settings, System Settings): Select the settings to import.
Execute: Performs import.
You can select the state of the display when the power is turned on.
Last memory: The video display starts up with the settings last used.
User 1-3: It starts up with the settings saved in "User 1-3" under "Export".
Returns all settings to factory default. When selected, the message "Reset all settings to factory
defaults?" appears.
OK: Performs reset.
Cancel: Returns to the previous screen without resetting.