Table of Contents
Advertisement
Connecting the Main Unit to Input Devices
The video display has 3G/HD-SDI and HDMI input terminals that input devices are connected to.
CAUTION
• Check that the power of the video display and input devices is switched off before connecting.
■ To input 4K signals using 3G/HD-SDI input terminal
• 3G/HD-SDI
3G/HD-SDI has four inputs which correspond to a display area. The display area icons located in the 3G/HD-SDI
input terminal area show where the input video is displayed on the screen. Please ensure these are connected
correctly as indicated by the icons.
• 3G-SDI RAW
To input 3G-SDI RAW, signals with a frame rate of 30.00 P or smaller can be input using one input in Input A-D.
Signals with a frame rate over 30.00 P require two inputs either Input A and Input B or Input C and Input D.
When the frequency is 30.00P or less
Reference
• The connection is checked using Canare Corp. BNC cable (multi) 4VS03A-5C.
• 3G-SDI RAW throughout output corresponds to the terminal. Even during full-screen display, when signals are input from
Input A, connect the cable to the SDI (OUT) terminal of Input A.
Display area icon
SDI (IN) terminal
Input A
Input B
Input C
Input D
When the frequency is over 30.00P
Input A and Input B
Input C and Input D
Installation/Connection
15
Advertisement
Table of Contents
