Using The Channel (Ch) Button - Canon DP-V2411 Instruction Manual

Operating the Video Display
The following content is assigned to function buttons on the video display by factory default.
F button Normal mode
F1 Contrast
F2 Brightness
30
F3 Time Code
F4 WFM/VEC
F5 Audio Level Meter
F6 Zoom Preset
F7 Hide OSD
F8 Boost Contrast
Reference
• Holding the F button down will display the function selection screen, and you can set the function you wish to register.
• You can check the function assigned to the F buttons of the main unit.
Open the [Function Settings]
dial while OSD is not showing will display the list of functions.

Using the Channel (CH) Button

You can assign channels (various settings related to input signal) to the CH buttons on the video display and switch
channels instantly.
1 Open the [Display Channel] menu.
[System Settings]
• The button selection screen will be displayed.
2 Select the name of the button using the jog dial and press the jog dial to determine the selection.
3 Select the channel to assign using the jog dial.
• See [Channel Settings] (
4 Press the jog dial to determine the selection.
• The setting is confirmed.
CDL mode
CDL R
CDL G
CDL B
CDL Power
CDL Offset
CDL Slope
CDL Saturation
CDL/User LUT Bypass
[Various Function]
[Function/Channel Button]
52) for the configurable settings.
[Function Button Guide] menu and select [On]. Pressing the jog
[Display Channel]