Table of Contents
Advertisement
■ Back face of the main unit
Carrying handle
A q
HDMI input terminal
A a
LAN (10/100 BASE)
A s
terminal
3G/HD-SDI output
A d
terminal
3G/HD-SDI input
A f
terminal
DC power input
A g
terminal
AC power input
A h
terminal
CAUTION
• When connecting an external sensor for calibration to the USB port, cable length must not exceed 3 m. Otherwise,
communication error may occur and correct calibration may not be possible.
• For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when
connecting peripheral devices.
• Pass through SD-SDI signals are not output correctly.
Note
• Both FAT16 and FAT32 USB memory devices are supported.
• Proper operation cannot be guaranteed for all USB memories.
• It may take 10 seconds or more for the USB memory to be recognized. If the function to save data on a USB memory is
executed during recognition, the message "Detecting USB memory" is displayed.
10
Nomenclature
A a
A s
A d
A f A g A h
Used to install, connect, or carry the unit.
Used to input HDMI signals.
Connection for a Display Controller CL-01 (separately sold) or other equipment.
Pass through output corresponding to 3G/HD-SDI input terminal.
Used to input SDI signals.
Connection for DC power supply.
Connection for the provided AC power supply cord.
A q
11
16
–
–
15
17
17
Advertisement
Table of Contents
