Main Specifications/Performance - Canon DP-V2410 Instruction Manual

Table of Contents

Advertisement

Main specifications/Performance

Panel
Panel Type
Screen Size
Aspect Ratio
Resolution
Active Display Area
Pixel Pitch
Panel Driver
Image quality
Brightness (Standard)
View Angle (Up, Down, Left, Right)
Surface Treatment
General
Backlight Type
Power
Power consumption
Environmental
Operating
Conditions
Storage/
Transporting
Dimensions (width x height x depth)
Weight
Mounting Hole Pitch
Interface
Input
3G/HD/SD-SDI
HDMI
Output
3G/HD-SDI
Head phone
Control
USB
LAN
66
Main specifications/Performance
IPS LCD panel
24 inch (61.1 cm)
17:9
4096x2160 (8.8 megapixels)
Approximately 540.7 x 285.1 mm
132 µm/193 ppi
1024 gradations, 10-bit for each RGB color
2
100 cd/m
89° (contrast ratio 10 : 1 or higher)
Anti-glare coating
RGB LED, direct down type
Rated Voltage: 100 – 240 V AC Rated Frequency: 50/60 Hz
24 V – 28 V DC Max. 8.9 A, XLR terminal
At maximum load (including change in brightness through aging): Approximately 210 W
At factory shipment: Approximately 160 W
Temperature and humidity: 0 – 40 °C (32 – 104 °F), 20 – 85 %RH (no condensation)
recommended: 15 – 30 °C (59 – 86 °F)
Pressure: 700 – 1060 hPa
Temperature and humidity: - 20 – 40 ˚C (-4 – 104 °F), 20 – 85 %RH (no condensation)
41 – 60 ˚C (105 – 140 °F), 20 – 30 %RH (no condensation)
Pressure: 700 – 1060 hPa
Including stands: Approx. 594×399×187 mm (23.4×15.7×7.4 in.)
Main unit only, excluding protrusions: Approx. 594×378×106 mm (23.4×14.9×4.2 in.)
Approximately 12 kg (26.4 lb)
VESA standard 100 x 100 mm (3.9 x 3.9 in.)
4 (1 systems) BNC (75Ω) receptacle terminal
3G-SDI: SMPTE 2048-2/274M/296/372/425-1/428-19/428-9 compliant
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
SD-SDI: Compliant with SMPTE-259M
1 (1 system) type A terminal Contents protection standard: HDCP 2.2
4 (1 pass-thru systems)
1 stereo mini jack, Supported impedance: 32 Ω to 64 Ω
1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full
Speed)/HS (High Speed) mode compatible
Compliant with Enhanced Host Controller Interface Specification for Universal Serial
Bus Revision 1.0
1 RJ-45 terminal
Compliant with IEEE802.3 10BASE-TX/IEEE802.3u 100BASE-TX

Advertisement

Table of Contents
loading

Table of Contents