Table of Contents
Advertisement
2. Insert the tip prevention fitting TP-01 into the two top screw holes and secure.
3. Pass a safety strap through the ring of the tip prevention fitting TP-01 and secure to the wall or stand.
Connecting the Main Unit to Input Devices
This main unit has four inputs which correspond to a display area. The display area icons located in the input terminal
area shows where the input video is displayed on the screen. Please ensure these are connected correctly as indicated
by the icons.
In addition, SDI has two I/O systems. Please ensure these are connected correctly according to the input number.
CAUTION
• Check that the main power of the main unit and input devices is switched off before connecting.
• For safety, do not connect connector that may have excessive voltage to the terminal of this main unit when connecting
peripheral devices.
3G/HD-SDI
Input
number
16
Installation/Connection
Display area icon
Actual screen display location
B
A
A
D
C
C
Input
number
Screw holes
B
D
DisplayPort
Display area icon
B
A
D
C
Advertisement
Table of Contents
