Video Osd Inputmethod Inputlanguage; Video Osd Inputmethod Cyrillic; Video Osd Loginrequired; Video Output Hdmi [1] Location Horizontaloffset - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents
Video OSD Output
This setting is not applicable for this product.

Video OSD InputMethod InputLanguage

This setting is not applicable for this product.

Video OSD InputMethod Cyrillic

This setting is not applicable for this product.

Video OSD LoginRequired

This setting is not applicable for this product.

Video Output HDMI [1] Location HorizontalOffset

noTE: Applies only to EX90.
Horizontaloffset and Verticaloffset settings are associated with each video output. These
settings are used to signal the relative position of the displays that are connected to these
outputs. The integrated lCD display has Horizontaloffset = 0 and Verticaloffset = 0 (implicit,
not configurable).
Horizontaloffset = 0 and Verticaloffset = 0 indicates that the display is positioned in center,
both horizontally and vertically. A negative horizontal offset indicates that the monitor is left of
center, and a positive horizontal offset indicates that the monitor is right of center. A negative
vertical offset indicates that the monitor is below center, and a positive vertical offset indicates
that the monitor is above center. The magnitude of the offset indicates how far the display is
from center (relative to other displays).
Example: you have two displays side by side, one in center and one to the left. Then the
following settings will apply: Horizontaloffset = 0 for the center display, Horizontaloffset = -1 for
the left display.
Example: you have two displays, one in center and one below. Then the following settings will
apply: Verticaloffset = 0 for the center display, Vertical offset = -1 for the lower display.
The default values for the different outputs are:
Video output HDmI [1] location: Horizontaloffset = 1, Verticaloffset = 0
Requires user role: ADmIn
Value space: <-100..100>
Range: The value must be between -100 and 100.
Video Output HDMI 1 Location HorizontalOffset: 1
Example:
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
Video Output HDMI [1] Location VerticalOffset
noTE: Applies only to EX90.
Horizontaloffset and Verticaloffset settings are associated with each video output. These
settings are used to signal the relative position of the displays that are connected to these
outputs. The integrated lCD display has Horizontaloffset = 0 and Verticaloffset = 0 (implicit,
not configurable).
Horizontaloffset = 0 and Verticaloffset = 0 indicates that the display is positioned in center,
both horizontally and vertically. A negative horizontal offset indicates that the monitor is left of
center, and a positive horizontal offset indicates that the monitor is right of center. A negative
vertical offset indicates that the monitor is below center, and a positive vertical offset indicates
that the monitor is above center. The magnitude of the offset indicates how far the display is
from center (relative to other displays).
Example: you have two displays side by side, one in center and one to the left. Then the
following settings will apply: Horizontaloffset = 0 for the center display, Horizontaloffset = -1 for
the left display.
Example: you have two displays, one in center and one below. Then the following settings will
apply: Verticaloffset = 0 for the center display, Vertical offset = -1 for the lower display.
The default values for the different outputs are:
Video output HDmI [1] location: Horizontaloffset = 1, Verticaloffset = 0
Requires user role: ADmIn
Value space: <-100..100>
Range: The value must be between -100 and 100.
Video Output HDMI 1 Location Vertical Offset: 0
Example:
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
113
Administrator Guide
Setting passwords Appendices