Video Input Source [1..3]/[1..2] Presentationselection; Video Input Source [1..3]/[1..2] Visibility - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents
Video Input Source [1..3]/[1..2] Type
noTE: EX90 has Video Input Source [1..3] and EX60 has Video Input Source [1..2].
Set which type of input source is connected to the video input.
Requires user role: ADmIn
Value space: <other/camera/PC/DVD/document_camera/whiteboard>
other: Use this when none of the below options match.
camera: Use this when a camera is connected to the video input.
PC: Use this when a computer is connected to the video input.
DVD: Use this when a DVD player is connected to the video input.
document_camera: Use this when a document camera is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.
Video Input Source 1 Type: PC
Example:
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings

Video Input Source [1..3]/[1..2] PresentationSelection

Define how the video system will behave when a presentation source is connected to the video
input. In general, any input source can be used as a presentation source; normally, the main
camera (self-view) will not be used as a presentation source.
If the video system is in standby mode, it will wake up when you connect a presentation source.
note that sharing the presentation with the far end always requires additional action (tap Start
Presenting on the Touch controller).
EX60: The value for Source 1 is fixed to Automatic. The default value for Source 2 (camera) is
Hidden.
EX90: The values for Source 1 and Source 2 are fixed to Automatic. The default value for
Source 3 (camera) is Hidden.
Requires user role: ADmIn
Value space: <manual/Automatic/onConnect/Hidden>
Manual: In manual mode, the contents of the input source will not be presented on the
screen until you select it. Use the Touch controller to choose which input source to present.
Automatic: In automatic mode, the content on the input source will be presented on screen
automatically. If more than one source is set to Automatic, the last connected source will be
used. If any content was active (presented) when the call was disconnected, the content will
still be displayed locally.
OnConnect: When in on-connect mode, the content on the input source will be presented
on screen when a cable is connected. otherwise, the behavior is like when in manual mode.
Hidden: In hidden mode, the contents of the input source do not appear in the graphical user
interface.
Video Input Source 1 PresentationSelection: Automatic
Example:

Video Input Source [1..3]/[1..2] Visibility

noTE: EX90 has Video Input Source [1..3] and EX60 has Video Input Source [1..2].
Define the visibility of the video input source in the menus on the user interface.
Requires user role: ADmIn
Value space: <never/Always/IfSignal>
Never: Set to never when the input source is not expected to be used as a presentation
source.
Always: When set to Always, the menu selection for the video input source will always be
visible on the graphical user interface.
IfSignal: When set to IfSignal, the menu selection for the video input source will only be
visible when a presentation source is connected to the video input.
Video Input Source 1 Visibility: IfSignal
Example:
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
106
Administrator Guide
Setting passwords Appendices