Cisco TelePresence EX60 Administrator's Manual page 115

Cisco TelePresence System EX Series
Contents
Video Output HDMI [1] Resolution
noTE: Applies only to EX90.
Select the preferred resolution for the monitor connected to the video output HDmI connector.
This will force the resolution on the monitor.
Requires user role: ADmIn
Value space: <Auto/640_480_60/800_600_60/1024_768_60/1280_1024_60/1280_720_50/
1280_720_60/1920_1080_50/1920_1080_60/1280_768_60/1360_768_60/1366_768_60/16
00_1200_60/1680_1050_60/1920_1200_60>
Auto: The system will automatically try to set the optimal resolution based on negotiation
with the connected monitor.
640_480_60: The resolution is 640 x 480, and the refresh rate is 60 Hz.
800_600_60: The resolution is 800 x 600, and the refresh rate is 60 Hz.
1024_768_60: The resolution is 1024 x 768, and the refresh rate is 60 Hz.
1280_1024_60: The resolution is 1280 x 1024, and the refresh rate is 60 Hz.
1280_720_50: The resolution is 1280 x 720, and the refresh rate is 50 Hz.
1280_720_60: The resolution is 1280 x 720, and the refresh rate is 60 Hz.
1920_1080_50: The resolution is 1920 x 1080, and the refresh rate is 50 Hz.
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.
1280_768_60: The resolution is 1280 x 768, and the refresh rate is 60 Hz.
1360_768_60: The resolution is 1360 x 768, and the refresh rate is 60 Hz.
1366_768_60: The resolution is 1366 x 768, and the refresh rate is 60 Hz.
1600_1200_60: The resolution is 1600 x 1200, and the refresh rate is 60 Hz.
1680_1050_60: The resolution is 1680 x 1050, and the refresh rate is 60 Hz.
1920_1200_60: The resolution is 1920 x 1200, and the refresh rate is 60 Hz.
Video Output HDMI 1 Resolution: Auto
Example:
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
Video Output LCD [2]/[1] Resolution
noTE: EX90 has a lCD 2 connector and EX60 has a lCD 1 connector.
Set the resolution and refresh rate for the video system's lCD screen.
Requires user role: ADmIn
Value space: EX90: <1920_1200_60> EX60: <1920_1080_60>
1920_1200_60: The screen resolution is 1920 x 1200, and the refresh rate is 60 Hz (only
EX90).
1920_1080_60: The screen resolution is 1920 x 1080, and the refresh rate is 60 Hz (only
EX60).
Video Output LCD 1 Resolution: 1920 _ 1080 _ 60
Example:
Video Output LCD [2]/[1] MonitorRole
noTE: EX90 has a lCD 2 connector and EX60 has a lCD 1 connector.
Set the lCD monitor role. Do not change this setting manually; keep the default setting.
Value space: <InternalSetup>
InternalSetup: The internal setup as defined by the Touch controller will be used.
Video Output LCD [2]/[1] Brightness
noTE: EX90 has a lCD 2 connector and EX60 has a lCD 1 connector.
Set the brightness level for the monitor.
Requires user role: ADmIn
Value space: <0..100>
Range: Select a value from 0 to 100.
Video Output LCD 1 Brightness: 50
Example:
Video Output LCD [2]/[1] Red
noTE: EX90 has a lCD 2 connector and EX60 has a lCD 1 connector.
Set the red color level for the monitor.
Requires user role: ADmIn
Value space: <0..100>
Range: Select a value from 0 to 100.
Video Output LCD 1 Red: 50
Example:
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
115
Administrator Guide
Setting passwords Appendices