Networkservices Snmp Communityname; Networkservices Ssh Mode; Networkservices Ssh Allowpublickey; Networkservices Snmp Systemcontact - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents

NetworkServices SNMP CommunityName

Enter the name of the network Services SnmP Community. SnmP Community names are used
to authenticate SnmP requests. SnmP requests must have a password (case sensitive) in order
to receive a response from the SnmP Agent in the codec. The default password is "public".
If you have the Cisco TelePresence management Suite (TmS) you must make sure the same
SnmP Community is configured there too. noTE: The SnmP Community password is case
sensitive.
Requires user role: ADmIn
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
NetworkServices SNMP CommunityName: "public"
Example:

NetworkServices SNMP SystemContact

Enter the name of the network Services SnmP System Contact.
Requires user role: ADmIn
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
NetworkServices SNMP SystemContact: ""
Example:

NetworkServices SNMP SystemLocation

Enter the name of the network Services SnmP System location.
Requires user role: ADmIn
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
NetworkServices SNMP SystemLocation: ""
Example:
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings

NetworkServices SSH Mode

SSH (or Secure Shell) protocol can provide secure encrypted communication between the
codec and your local computer.
Requires user role: ADmIn
Value space: <off/on>
Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.
NetworkServices SSH Mode: On
Example:

NetworkServices SSH AllowPublicKey

Secure Shell (SSH) public key authentication can be used to access the codec.
Requires user role: ADmIn
Value space: <off/on>
Off: The SSH public key is not allowed.
On: The SSH public key is allowed.
NetworkServices SSH AllowPublicKey: On
Example:

NetworkServices CTMS Mode

This setting determines whether or not to allow multiparty conferences controlled by a Cisco
TelePresence multipoint Switch (CTmS).
Video systems are able to initiate or join non-encrypted multiparty conferences controlled by
CTmS version 1.8 or later. Encrypted conferences are supported as from software versions
CTmS 1.9.1. Encryption is addressed in the networkServices CTmS Encryption setting.
Requires user role: ADmIn
Value space: <off/on>
Off: multiparty conferencing via CTmS is prohibited.
On: multiparty conferencing via CTmS is allowed.
NetworkServices CTMS Mode: On
Example:
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
84
Administrator Guide
Setting passwords Appendices