Video Monitors; Video Osd Encryptionindicator; Video Osd Wallpaperselection; Video Osd Missedcallsnotification - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents

Video Monitors

Set the monitor layout mode.
Requires user role: ADmIn
Value space: <Single/DualPresentationonly>
Single: The same layout is shown on all monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor. This value is not supported on
EX60.
Video Monitors: Single
Example:
Video OSD Mode
This setting is not applicable for this product.

Video OSD WallpaperSelection

This setting is not applicable for this product.

Video OSD LanguageSelection

This setting is not applicable for this product.

Video OSD MenuStartupMode

This setting is not applicable for this product.

Video OSD VirtualKeyboard

This setting is not applicable for this product.
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings

Video OSD EncryptionIndicator

Define for how long the encryption indicator (a padlock) will be shown on screen. The setting
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted
calls is a crossed out locked padlock.
Requires user role: ADmIn
Value space: <Auto/Alwayson/Alwaysoff>
Auto: If the Conference Encryption mode setting is set to BestEffort and the call is
encrypted, the encryption indicator is shown during the first seconds of a call. If the
Conference Encryption mode setting is set to BestEffort and the call is non-encrypted, the
crossed out encryption indicator is shown during the entire call. If the Conference Encryption
mode setting is noT set to BestEffort, the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies
to both encrypted and non-encrypted calls for all Conference Encryption mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both
encrypted and non-encrypted calls for all Conference Encryption mode settings.
Video OSD EncryptionIndicator: Auto
Example:

Video OSD MissedCallsNotification

This setting is not applicable for this product.

Video OSD AutoSelectPresentationSource

This setting is not applicable for this product.

Video OSD CallSettingsSelection

This setting is not applicable for this product.

Video OSD TodaysBookings

This setting is not applicable for this product.

Video OSD MyContactsExpanded

This setting is not applicable for this product.
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
112
Administrator Guide
Setting passwords Appendices