Fst Connection; Fst Setup And Connection - Cisco C880 M4 Service Manual

APP0202000
B.2 FST Connection
This section describes connection between the main unit and the FST.
APP0202010
B.2.1 FST Setup and Connection
Use the following instructions for setting the FST and connecting between the FST and the MMB.
(1) Connect a LAN straight cable between the FST LAN port and the MMB LOCAL port on the
MMB. See Figure B.2.1, "MMB external interface".
ANNT)Do not connect the cables to the MMB User ports.
(2) Start the FST.
(3) Start the terminal software, and select the serial port connected to the FST.
(4) Set up the terminal software. See Table B.2.1, "Terminal software settings."
(5) Configure FST with the "IP Address" and "Subnet mask".
(6) Specify the Web browser security settings.
Set for the file download dialog box not to be blocked.
ANNT)Web browser security settings may be ignored.
(7) When OS for FST is Windows Vista or newer version, disable UAP (User Account Protection) or
UAC (User Account Control). Check each Windows OS manual and etc.... for more details.
Figure B.2.1 MMB external interface
Table B.2.1 Terminal software settings
Setting item
Transfer rate (bps)
Data bits
Parity
Stop bit
Flow control
Emulation
Terminal size
Value
19200
8
None
1
None
VT100
80 x 24
55
CA92344-0577-01