Procedure For Adding Memory; Checking The Delivered Items; Mounting The Adding Options (Existing Sb) - Cisco C880 M4 Service Manual

SET0302000

3.2 Procedure for Adding Memory

SET0302010

3.2.1 Checking the delivered items

(1) Check the delivered items by confirming the following.
1. The types and quantities of delivered options match those written on the order sheet.
2. The delivered items match those listed in the List of Accessories.
3. All cabinets are free of any abnormalities such as scratches, dents, or dirt.
4. The specifications and version level of units delivered separately due to delivery considerations
are available for the target functions.
(2) Use the following instruction for the next step.
- Proceed to 3.2.2 Mounting the adding options (Existing SB)
existing SB.
- Proceed to 3.2.3 Mounting the adding options (New SB)
SET0302020

3.2.2 Mounting the adding options (Existing SB)

Use the following steps to mount the added options.
ANNT)
- If you are going to handle a power cable during power-on and power-off operations, be sure to
confirm in advance the cable connection locations on the relevant equipment and on the
customer distribution panels or power distribution boxes.
- Make sure that the system administrator has specified the number of options to be mounted and
their mounting locations.
ANNT) If you start the work with the main unit powered off, turn on the AC power and mount the added
options.
(1) Connect the FST. See Appendix B.2.1, "FST Setup and Connection (APP0202010)".
(2) Login to the Web-UI.
Table 3.2.2-1 lists the values to be set to log in to Web-UI.
See Appendix B.3.1, "Login (APP0203010)".
Item
URL
Username
Password
Table 3.2.2-1
Setting values
http://<Maintenance IP Address>:<http port#> or
https://<Maintenance IP Address>:<https port#>
This depends on the system configuration.
http port#:Default(8081)
https port#:Default(432)
Account username
Account Password
27
(SET0302020) when mounting the
(SET0302030) when mounting the new SB.
CA92344-0577-01